|
Mô tả sản phẩm:
Bộ nới tầm Beam 30m System Sensor BEAMLRK Thông số kỷ thuật Xuất xứ: Trung Quốc Nhà sản xuất: System Sensor Mã sản phẩm: BEAMLRK Bảo hành 12 tháng. |
- CSKH: 0901.37.33.56 (Ms.Quỳnh) - 0912.124.679(Ms.Hoa)
- Hỗ trợ trực tuyến
×
![]()
Bộ nới tầm 30m System Sensor BEAMLRK
Mã sản phẩm: System Sensor BEAMLRK Lượt xem: 368
Liên hệ
Xuất xứ
Brand
Mô tả chi tiết
Bộ nồi tầm 30m System Sensor BEAMLRKThe BEAMLRK allows reflected beam detectors to be installed at separations
between 230 and 328 feet (70 to 100 meters). At these distances, four 8˝ ×
8˝ reflectors must be used to provide enough reflected infrared light. This
kit includes 3 additional reflectors with new test scale legends. The reflector
included with the transmitter/receiver unit is the fourth reflector to be used.
This kit is not compatible with the multi-mount kit (BEAMMMK).
The kit includes the following parts:
Qty. Description
1 8˝ × 8˝ reflector (10% to 25% test scale)
1 8˝ × 8˝ reflector (30% to 65% test scale)
1 8˝ × 8˝ reflector (no test scale)
MOUNTING INSTRUCTIONS
1. Peel off the test scale sticker from the reflector included with the transmitter/receiver unit.
2. Securely mount all four reflectors to the wall using all four screw holes
on each reflector. (see Mounting Instructions section of the manual included with the transmitter/receiver unit for more details). The reflectors
should be mounted as close to each other as possible. They should be
mounted in a square pattern as indicated in Figure 1. The upper left
reflector when viewed from the front should contain the lower test scale
(10 to 25%). The upper right reflector should contain the higher test
scale (30 to 65%). The bottom reflectors do not have a scale on them.
3. Complete the installation of the transmitter/receiver unit using the instructions included with the beam detector.
4. Test the system as indicated in the beam detector instructions. (see “Sensitivity Testing” section of the transmitter/receiver instructions).
