• CSKH: 0938.125.206 (Ms.Quỳnh) - 0903.948.917(Ms.Huyền)
  • Hỗ trợ trực tuyến 
    0903.948.917
    0912124679
Đồng hồ đo VAF PF Unbalance Schneider METSEDM6200HCL10RS
Đồng hồ đo VAF PF Unbalance Schneider METSEDM6200HCL10RS
5.300.000 VND
[Giá chưa bao gồm VAT]

Đồng hồ đo VAF PF Unbalance Schneider METSEDM6200HCL10RS

Mã sản phẩm: Schneider METSEDM6200HCL10RS Lượt xem: 128

Mô tả sản phẩm:
Đồng hồ đo VAF PF% Unbalance Schneider METSEDM6200HCL10RS
– Easy to install: Mounts using two retainer clips, no tools required. Compact meter with 49 mm meter depth behind the panel, connectable up to 480 V +10 % AC volts L-L without voltage transformers for installation complaint with measurement category III, and double insulated
– Easy to operate: Intuitive navigation with self-guided menus and Heartbeat LED indicates normal functioning of meters while it conveys the communication status when connected to RS-485 network
– LED display: Intuitive navigation with self-guided, four buttons, 8-segment alpha-numeric LEDs of height ~14.2 mm (0.55 in), and three lines of concurrent values with Kilo & Mega value indicator.
– Standard compliance:
– EMI/ EMC tests as per IEC 61326-1
– CE certification as per IEC 61010-1 Edition 3
– cULus as per UL61010-1 and CAN/CSA-C22.2 IEC 61010-1 edition 3, for 480 V AC L-L
– Accuracy class 1.0 for V AF PF metering
– CT nominal: 5 A, I-nominal or 1 A, I-nominal (field settable)
– Password: Field configurable password for securing set up information
– Cyber security: Option for disabling RS-485 port through front panel keys against unauthorized access. This feature can also be used for maintenance and troubleshooting of complex communication network
– Analogue load bar: The colour-coded analogue load bar at the front side indicates the percentage of load through 12 LED’s with the option to select full scale based on connected load
– Display: 4 digits for VAF PF parameters with auto scale and auto range features
– Suppression current: To disregard the measurement of induced and panel auxiliary load current in the circuit (settable from 5 to 99 mA)
– Protection cover to ensure that terminals screws does not detach from the housing and touch proof against fingers

 
5.300.000 VND
[Giá chưa bao gồm VAT]
Xuất xứ
Hãng sản xuất
 

Mô tả chi tiết

Đồng hồ đo VAF PF% Unbalance Schneider METSEDM6200HCL10RS
Introducing EasyLogicTM DM6000H/ DM6200H meters that are ideal replacement for multiple analogue meters for stand-alone metering in custom panels, switch boards, switch-gear, genset panels, motor control centres, power factor improvement panels and OEM panel board.
DM6x00H series meters offer large 8-segment alpha-numeric LED display type, intuitive navigation with self-guided 4 buttons, bright LED’s of 14.2mm height with 12 LEDs for indicating percentage of load in the circuit.
Applications
– Cost management
– Electrical installation remote monitoring
– Control panels
– Motor control centres
– Power distribution boards
– Original equipment manufacturers (OEM’s)
– Building management system
– Panel instrumentation
– Energy management system
Network management
– Measurement of Power factor
– % unbalance for voltage and current
– Phase angle between the respective voltage and current phase
– Modbus RTU protocol, RS-485 communication port for integration with energy management systems (DM6200H)
Main characteristics
– Easy to install: Mounts using two retainer clips, no tools required. Compact meter with 49 mm meter depth behind the panel, connectable up to 480 V +10 % AC volts L-L without voltage transformers for installation complaint with measurement category III, and double insulated
– Easy to operate: Intuitive navigation with self-guided menus and Heartbeat LED indicates normal functioning of meters while it conveys the communication status when connected to RS-485 network
– LED display: Intuitive navigation with self-guided, four buttons, 8-segment alpha-numeric LEDs of height ~14.2 mm (0.55 in), and three lines of concurrent values with Kilo & Mega value indicator.
– Standard compliance:
– EMI/ EMC tests as per IEC 61326-1
– CE certification as per IEC 61010-1 Edition 3
– cULus as per UL61010-1 and CAN/CSA-C22.2 IEC 61010-1 edition 3, for 480 V AC L-L
– Accuracy class 1.0 for V AF PF metering
– CT nominal: 5 A, I-nominal or 1 A, I-nominal (field settable)
– Password: Field configurable password for securing set up information
– Cyber security: Option for disabling RS-485 port through front panel keys against unauthorized access. This feature can also be used for maintenance and troubleshooting of complex communication network
– Analogue load bar: The colour-coded analogue load bar at the front side indicates the percentage of load through 12 LED’s with the option to select full scale based on connected load
– Display: 4 digits for VAF PF parameters with auto scale and auto range features
– Suppression current: To disregard the measurement of induced and panel auxiliary load current in the circuit (settable from 5 to 99 mA)
– Protection cover to ensure that terminals screws does not detach from the housing and touch proof against fingers

 

Đánh giá

     

 

Bình luận

  Ý kiến bạn đọc